FAQ
Turnkey EMS, Consignment or Partial Turnkey: Which PCBA Manufacturing Model Fits Your Project?
Prepared by DMAX, Double Max International Co., Ltd.
Last updated: October 2026
Technical Answer
Turnkey EMS, consignment and partial turnkey are the three common ways to divide material sourcing between a customer and an EMS partner.
In turnkey, the EMS partner supports sourcing and production based on the customer-approved BOM and agreed project scope. In consignment, the customer supplies the materials. In partial turnkey, responsibility is shared. The right choice depends on BOM maturity, material risk, control needs, schedule and traceability requirements.
The model defines who does what in sourcing and material handling. It does not change who approves the BOM, substitute parts and production release. Those responsibilities stay with the customer.
The Three Models Compared
| Model | Who Sources the Materials | Best Fit | Key Risk to Clarify |
|---|---|---|---|
| Turnkey EMS | The EMS partner, based on the customer-approved BOM and agreed project scope | Buyers who want sourcing, assembly and production coordination in one place | BOM completeness, approved alternatives, AVL rules, lead time, surplus material |
| Consignment | The customer provides most or all materials | Customers with strong sourcing control, strategic inventory or customer-controlled parts | Arrival timing, quantity, incoming quality, replacement parts |
| Partial turnkey | Customer and EMS partner share, by material group | Projects with both customer-controlled critical parts and standard parts the EMS partner can source | Responsibility split, material handover, shortage response |
Who Is Responsible for What?
The matrix shows typical arrangements. Actual responsibility is confirmed at quotation and in the project agreement.
| Area | Turnkey EMS | Consignment | Partial Turnkey |
|---|---|---|---|
| Material sourcing | EMS partner supports sourcing based on agreed scope | Customer provides materials | Split by material group |
| Shortage response | EMS partner communicates sourcing risk and coordinates options for customer review | Customer typically leads shortage response for supplied materials | Responsibility follows the agreed material group |
| Spare quantity to cover assembly loss | Planned with the EMS partner and agreed in the quotation | Customer supplies the extra quantity | Each party for its own materials |
| Surplus and obsolete inventory | Agreed in advance, for example MOQ leftovers | Customer-owned | Agreed per material group |
| Traceability records | The customer provides the required upstream material records. The EMS partner records receiving, lot linkage and production use according to the agreed traceability scope. | Customer for supplied lots | Each party for its own lots |
| BOM approval, substitute approval, test criteria, production release | Customer | Customer | Customer |
How to Choose: Five Questions
- How complete is the BOM? A mature BOM with defined approval rules suits turnkey. An incomplete BOM needs a review first.
- Do you hold customer-controlled or strategic parts? These point to consignment or partial turnkey.
- How much purchasing work do you want to keep in-house? Turnkey moves most of it to the EMS partner.
- How tight is the schedule, and how exposed is the BOM to long lead times? Exposure raises the value of early sourcing support.
- Which traceability and approval rules apply? They decide who must keep which records.
The BOM, shortage and AVL questions above have their own guides: BOM risk analysis, component shortages and allocation, and AVL and second-source planning.
Hidden Risks in Each Model
- Turnkey: minimum order quantities that leave surplus, quotation validity against market price changes and slow substitute approvals.
- Consignment: late or short deliveries, missing spare parts and gaps in incoming quality documentation.
- Partial turnkey: an unclear split, where each party assumes the other covers the gap.
Example Scenario: Partial Turnkey Responsibility Not Defined
The following is a general example for buyer reference, not a specific DMAX customer case.
A PCBA project uses customer-controlled ICs, EMS-sourced passive components and a cable assembly with customer-specified connectors. The customer assumes the EMS partner will handle replacement connectors. The EMS partner assumes the connectors are customer-controlled because the drawing names a customer-approved manufacturer. When connector lead time grows, nobody has clear ownership of the response.
Before purchasing or assembly, the buyer and EMS partner should confirm:
- Which components are customer-supplied and which are EMS-sourced
- Who manages shortage response for each material group
- Which parts need customer approval before substitution
- Who owns surplus or obsolete inventory
- Who supplies replacement parts for assembly loss
- Who provides traceability records for customer-supplied materials
Practical note: the model question is often settled faster when the customer brings a BOM in which every line is already marked customer-supplied or EMS-sourced. This marking should be discussed at the start of quotation.
How DMAX Supports Each Model
DMAX supports PCBA and cable assembly projects under all three models:
- Turnkey EMS: material sourcing support based on the customer-approved BOM and AVL, with production coordination, inspection and testing.
- Consignment: assembly and production execution with customer-supplied materials, with incoming material checks to the agreed scope.
- Partial turnkey: sourcing for the agreed material groups, with the responsibility split recorded in the BOM and project documents.
Before quotation is finalized, DMAX can coordinate with customer teams to clarify scope, material responsibility, inspection requirements and production readiness. Final model selection, BOM approval, substitute approval, inventory responsibility and product qualification are confirmed by the customer’s responsible team.
EMS Model Checklist
- Is the BOM complete enough for quotation, sourcing and production planning?
- Is every line marked customer-supplied or EMS-sourced?
- Are customer-controlled or strategic parts identified?
- Are approved manufacturers, AVL rules and substitute approval steps defined?
- Have long lead time, allocation and EOL risks been reviewed?
- Are spare quantities and delivery dates agreed for customer-supplied parts?
- Is ownership of surplus and obsolete inventory agreed?
- Are traceability, inspection and test requirements defined for both material groups?
Need Help Choosing the Right PCBA Manufacturing Model?
Choosing between turnkey, consignment and partial turnkey affects sourcing responsibility, schedule control, traceability and material ownership. Contact DMAX to discuss which model fits your sourcing, schedule and control needs. Detailed project files can be shared through the agreed inquiry or NDA process.
Related Topics
Frequently Asked Questions
What is turnkey EMS?
Turnkey EMS is a model in which the EMS partner supports material sourcing and production based on the customer-approved BOM, drawings and specifications. The exact scope is confirmed during quotation and production planning.
What is consignment PCBA manufacturing?
In consignment, the customer provides most or all materials to the EMS partner, which focuses on assembly, inspection, testing and production execution within the agreed scope.
What is partial turnkey EMS?
Partial turnkey is a shared model. The customer provides selected critical materials, and the EMS partner sources selected components or production materials according to the project agreement.
Which model is best for my PCBA project?
It depends on BOM maturity, material control needs, sourcing risk, schedule and traceability requirements. Each model suits different situations, and the choice can change between prototype and mass production.
Does turnkey EMS mean the EMS partner owns all material risk?
Not automatically. Surplus inventory, obsolete material, substitute approval and shortage responsibility depend on the agreed project scope and customer-approved requirements, so they should be defined during quotation.
Who approves substitute parts in turnkey or partial turnkey projects?
The customer’s responsible engineering, purchasing or quality team, following the customer-defined approval process. The EMS partner can identify possible alternatives or sourcing concerns, but final approval stays with the customer.
How does DMAX support turnkey, consignment and partial turnkey projects?
DMAX supports sourcing, assembly, inspection and testing according to the model chosen, and helps clarify material responsibility, inspection requirements and production readiness before quotation is finalized.
About DMAX
DMAX, Double Max International Co., Ltd., supports PCBA assembly, cable assembly and EMS manufacturing discussions based on customer-approved specifications and agreed project scope. For project inquiries, please contact DMAX through the official inquiry form.