FAQ
How to Compare Drone PCB Assembly Quotes for a Pilot Build
To compare drone PCB assembly quotes for a pilot build, check what ships with each board, which tests the unit price covers, and when the lead time starts. Two suppliers can quote the same thermal imaging board for a solar inspection drone. One prices the assembled board. The other includes a mating cable and tests every board with the OEM’s camera module. What would it cost to receive the same tested assembly from each supplier?
DMAX is the Taiwan contact for overseas OEMs coordinating PCB procurement, component sourcing, SMT assembly, inspection and project-specific functional testing. If the bill of materials (BOM) lists a connector but the assembly drawing shows a cable, we can check with your team whether the cable is needed for testing, for shipment with each board, or both. We then request pricing from our manufacturing partners against that scope.
Example Scenario: Two Quotes for the Same Drone PCB Assembly
In this hypothetical pilot build, an OEM sends the same request for quotation (RFQ) to two suppliers for a thermal imaging interface board. Purchasing receives the following offers.
| Item | Quote A | Quote B |
|---|---|---|
| Deliverable | Assembled interface board | Assembled interface board and mating cable |
| Cable cost | Excluded from the unit price | Included in the unit price |
| Acceptance | Assembly inspection | Assembly inspection and a functional test on every board |
| Test equipment | No fixture included | OEM supplies a compatible fixture and reference camera module |
| Lead time starts | To be confirmed | After order acceptance and receipt of the OEM’s test equipment |
Purchasing can send both suppliers the same follow-up:
“Please quote one board with its mating cable and a recorded image test on every unit. Show one-time setup or fixture charges separately, and confirm when the lead time starts if we supply the reference module.”
The buyer can then compare the total cost for the pilot lot, including any test equipment the OEM must provide. For Quote B, purchasing also needs to know when its engineering team can release the reference module. That date affects the earliest shipment even if the quoted production lead time stays the same.
How many finished boards should you put on the order?
DMAX normally produces the quantity of conforming boards specified in the purchase order. An order for 100 sets with one board per set calls for 100 conforming boards for delivery. If you need separate samples or spares, include them in the agreed order quantity before production.
Need samples or spares? Add them to the agreed order quantity before production.
Which drone boards should you include in the RFQ?
List the part number and revision of each assembly you want quoted. A civil UAV may combine several functions on one board or use a purchased module. Identify which items the supplier will assemble, which the OEM will supply and which will ship with each unit. If you are shortlisting suppliers, see how to choose a PCB assembly partner for industrial drones.
What manufacturing and testing should the price cover?
Specify the bare PCB, assembly and any enclosure work separately. For multilayer or rigid-flex boards, DMAX can review the released drawings and acceptance requirements with the proposed board fabricator. Identify surface-mount (SMT) and through-hole (THT) parts. A dual in-line package (DIP) is one example of a through-hole package. If the supplier will install the board and harness in an enclosure, request a separate box build price.
Automated optical inspection (AOI) checks visible assembly features. X-ray can examine selected hidden joints. A functional test checks what a powered board actually does. For the inspection board, the OEM might require a successful image readout with a specified module. Agree on the fixture, firmware, pass/fail criteria and records. If weight, vibration or thermal limits affect acceptance, identify the relevant assembly and test conditions. For a controller and harness in a factory automation project, see industrial robotic arm PCB assembly and harness testing.
What does DMAX need to quote and release a pilot build?
| Turnkey PCBA | Partial turnkey | Consigned | |
|---|---|---|---|
| Bare boards and components | DMAX coordinates | OEM supplies selected items | OEM supplies the materials listed in the agreement |
| Assembly and agreed tests | DMAX coordinates | DMAX coordinates | DMAX coordinates |
- Sourcing model. For turnkey PCBA, DMAX coordinates bare boards, components, assembly and agreed tests. In a partial turnkey build, the OEM supplies selected items. In a consigned build, the OEM supplies the physical materials listed in the agreement.
- Build files. For a detailed quote, prepare the released Gerber and drill files, PCB specifications, assembly drawing, pick-and-place file and BOM with manufacturer part numbers. Mark customer-supplied items and unpopulated positions. Agree who approves substitutions or noncancelable, nonreturnable purchases. See the PCBA BOM review guide.
- Pilot and repeat orders. State lot quantities, delivery destination and target dates. Use the approved prototype revision and reference sample to review the first article and pilot test records. Before scheduling mass production, confirm material availability, partner capacity and the OEM’s written release of the revision and quantity. See DMAX’s NPI review process.
What should the OEM agree before releasing files or materials?
If an end customer owns the design, establish which files may be shared, with which partners and for what purpose. Agree on a nondisclosure agreement (NDA), the transfer method, retention period and return or deletion of files. Record ownership and permitted use of firmware, fixtures and test software. If photographs, other project use or publication require written permission, say so in the agreement. See how DMAX handles project confidentiality.
Agree on the return or disposal of unused customer-supplied materials and the records you need at project close.
Which standards belong in the purchase specification?
For rigid bare boards, IPC-6012 addresses qualification and performance, and IPC-A-600 addresses acceptability. For assembled boards, J-STD-001 covers soldering requirements, and IPC-A-610 covers assembly acceptance. Specify the agreed revision and class in the purchase documents. See the IPC electronics manufacturing standards.
DMAX currently has no AS9100-certified suppliers in its manufacturing network. If your project requires assembly at an AS9100-certified site, please state that requirement in your initial inquiry.
The end-product manufacturer determines the requirements for the intended market. These may include EU conformity assessment and CE marking where applicable, or US Remote ID requirements for Standard Remote ID drones and broadcast modules. Board inspection records document the checks performed on the assembly. For product-level requirements, see the EASA guidance on EU drone conformity and the FAA Remote ID guidance for manufacturers.
Request a Drone PCB Assembly Quote for Your Pilot Build
Tell us which board you need, your pilot quantity and target delivery date. If you already know what each board must pass before shipment, include that in your message. We can clarify the sourcing and testing scope with you and agree on confidentiality and file transfer before you send the BOM or Gerbers.
Discuss your pilot build with DMAX or email [email protected].
From Prototype to Mass Production. We Make Complex PCBA Projects Manufacturable.